[closed] Ip cam really working??

[tashes]

hello,
Starting version 0.43 you are supporting ipcam. I does not seems to work for me. i tried using several ipcam models including d-link 2020 and dl-link 2121. I usually access my cam by: rtsp://cameraipadress:554/play1.sdp . but using Vidblaster i simply get a black screen.
Regards

[Mike]

Does the webcam sample link (http://webkamera.kristinehamn.se/axis-cgi/mjpg/video.cgi?resolution=640x480) in the help file work?

[Mike]

BTW: I think for D-link the proper URL would be

http://cameraipadress:554/mjpeg.cgi

but I assume this info is available in the camera's documentation.

[tashes]

The Sample URL works.
The http://cameraipadress:554/mjpeg.cgi address is used only for old dlink cams. for new cams like dcs 2121 use rtsp://cameraipaddress:554/play1.sdp .

I can access my cam at the address i mentioned above using VHmulticam studio mixer. then in vidblaster i have to use VHmulticam virtualcam output as a camera. ( as a workaround). but this limits me to one ip cam cause vhmulticam has only 1 vritualcam output.

Is there any way to access rstp stream directly in vidblaster.
Regards

[Mike]

RTSP is network streaming, not the same as IP Camera protocol. You can put in a feature request to support network streaming if you like. Make sure to add a sample RTSP link for testing.

PS: the Player probably already supports RTSP, but I am not sure if you can simply enter that address instead of a file name.

[tashes]

I have added this as a feature request.
I tried the player it does not allow address instead of filename.
As for testing link, i curently don't have real ip to publish my cam.
Thank you.