(3 x BM shutel) + (hub usb 3.0) + laptop i7 2630qm ?

[marko1101]

(3 x BM intensity shuttel) + (hub usb 3.0) + laptop i7 2630qm maybe ASUS N55SF-S1326V

or maybe, 3 x cube-250 5Ghz, over AccesPoint 5ghz N-mode connect in LAN on same laptop, RTMP

I need 3 x 720p from 3 cam (HDMI out)

any opinion ?

[zenvideo]

(3 x BM intensity shuttel) + (hub usb 3.0) + laptop i7 2630qm maybe ASUS N55SF-S1326V

any opinion ?

I wouldn't expect that to work. AFAIK each BM Shuttle needs to be on its own USB3 controller with a dedicated PCIe lane. Putting three on a hub is asking for trouble, IMHO.

[Mike]

I am still waiting for reports that the new generation of laptops is able to properly handle even one shuttle, let alone 3. I suggest the safe route and using a desktop for this with a PCI card or RTMP.

[marko1101]

i will buy this laptop to end of week, and then we will test one shuttel, even 3 shuttel if this will be posible with usb3 hub.
http://www.msi.com/product/nb/GE620DX.html#/?div=Specification

i will post report ...

[marko1101]

we did not test yet ... but colleague was do some test earlier with shuttel (not vidblaster) only usb3 in/out other software ...

Intel HM65 - work , my future MSI ;) , generally MSI GE620 work
Intel HM55 - not work
x58 - work
intel board with x58 - have some general problems with BM , but some alredy wright this on forum

i will post result with vidblaster ...

[marko1101]

first of all , i7 rocks ... vidblaster flying like jet plane ...

shuttel and MSI work ok.

btw, yesterday we broadcast some streming over 4 hours with:

- sony handycam HDR-SR11E FullHD
- intensity shuttel USB 3.0
- laptop msi GE620DX i7 2630QM 8core, 8Gb, USB 3.0
- Flash Media Live Encoder

two streaming simultaneously:
- HD streming 1920x1080, 25fps, 2,8Mbps
- SD streaming (wide) 640x360, 25fps, 800Kbps
- deinterlace enable
- CPU are 55%


we also test vidblaster , and there is no problem to make usually production ...
- VB seting are 1920x1080, 25fps
- one cam
- videoefect1
- program
- player1

... USB 3.0 work, I have video in modul cameraI and cameraII , bouth full auto seting.

using streamer profile vidblaster and streming with vidblaster ... CPU go to 95%, and then we have frame drops in Program, and on streaming video.


my goal ... 2 ge620dx ... one for vidblaster production, second for FMLE streaming ...

but, i still did not test HDMI out on laptop ...

can I used HDMI out, to conect HDMI out from MSI vidblaster, to Shuttel on second MSI ?

btw, I will test second Shuttel, (two on same time) in next week., MSI have two USB 3.0 ... maybe two will work.

I wait TCube, and then we will test two cable cam (if two shuttel work) and one CUBE over 5Ghz wifi network , on this notebook.

[Mike]

Thanks. You are breaking new grounds.